The Toys You Wish They Made

[Storm Wing]

Archer should be huge. If they plan on keeping him in scale with the rest of the F/SN figures, then Rin should only come up to his chest. There've been a few discussions on potential scale problems if an Archer Figma were made. If I've done my homework right, an in-scale Archer would be the tallest Figma to date... On the other hand, Figma are generally regarded as "non-scale" action figures, so Max Factory really isn't obliged to make such a big guy, even though a shorter Archer would look weird in the midst of a F/SN Figma collection...

Anyway, here's hoping they round out the Servants, maybe with a Sakura Matou on the side, just so we can have all three heroines, as well.

Says who?? If, and i mean IF, Figma consider Berserker as one of the Fate series, you'll need some extra space on the Toy display case
Khukhukhukhukhu~

[Hylian Pirate]

Yeah, I'd love a freaking huge Berserker, too. It should come with a fully articulated Figma Ilya as an accessory... with her own alternate face(s) and accessories... I'd pay for it... Damn would that be expensive... And it would be downright epic to have Berserker and Shirou posing with their huge axe-swords.

On another note, the preorders for Rider are up. I'm gonna wait to see her in Previews though... I love my local comic shop, and if I can support them by waiting to buy her there then I will. I'd like to urge others with the patience and income to do the same. Stuff from Diamond isn't cheap, but it isn't as expensive as some of the listings one finds on eBay, either. (For that matter, when you factor in shipping from an online shop, the prices are pretty comparable.) It's a shame they stopped North American Shinki distribution. It would be so much easier to spread the love if people could actually see me buying them in a brick-and-mortar store...

[Storm Wing]

Yeah, I'd love a freaking huge Berserker, too. It should come with a fully articulated Figma Ilya as an accessory... with her own alternate face(s) and accessories... I'd pay for it... Damn would that be expensive... And it would be downright epic to have Berserker and Shirou posing with their huge axe-swords.

On another note, the preorders for Rider are up. I'm gonna wait to see her in Previews though... I love my local comic shop, and if I can support them by waiting to buy her there then I will. I'd like to urge others with the patience and income to do the same. Stuff from Diamond isn't cheap, but it isn't as expensive as some of the listings one finds on eBay, either. (For that matter, when you factor in shipping from an online shop, the prices are pretty comparable.) It's a shame they stopped North American Shinki distribution. It would be so much easier to spread the love if people could actually see me buying them in a brick-and-mortar store...

An Illia Figma is highly unlikely, IMHO. But it's possible... With extremely high price, of course

Then again, why don't they make ALL the servants?? So far, we've seen Saber & Rider... Might as well make Assassin, Dark Assassin, Lancer, Archer, Caster, & Gilgamesh?? (aside from Berserker we're talking about). To be honest, i'm kinda sick with Nanoha series & Haruhi series

[Hylian Pirate]

You did notice the Archer prototype in the last pic I posted, right? The full compliment of Servants isn't outside the Realm of all Possibility. But remember, there has to be a Saber with each release. Figma has shown so far that Saber must make up at least 50% of the F/SN line. And that's not to mention the special Sabers like Lily and Extra... This is all sarcasm, but there seems to be truth to it, what with a current total of 5 Saber Figmas either out or planned.

So! let's go over a shortlist of Sabers to make sure the Fate/Stay Night Figmas can keep going!

Saber Alter (casual ver.)
Saber (Unarmored ver.)
Saber (Summer wear [see: Hollow Ataraxia])
Saber (swimsuit ver.)
Saber (male ver. [King Arthur])
Saber 2P (F/UC)
Saber Lion
Malibu Saber
Sabermus Prime
Strike Freedom Saber
Tengen Toppa Saber Lion
MMS Type Lion: Saber (I would love Konami forever...)
And, the most important, Saber (Voltron ver.)


Yep, we'll have F/SN Figmas for a long time to come!

[halconfenix]

now that i found that finally Bandai is bringing back the wing gundam (in MG flavor no less), gives me the possibility of dreaming for better versions of the 1/100 EW gundams (all five) and a re-engineered PG WZC.... that would be so damn cool (and merciless with my wallet). . .

references about MG Wing gundam
http://ngeekhiong.blogspot.com/2010/02/ ... -from.html

[pyroko]

along similar lines as above, the sight of a new HG line for AU suits really has me hoping that we get high grades of the Shuffle Alliance suits from G Gundam.

[v2gundam]

To me, the MG Wing Gundam is giving me the hope for MG Tallgeese (1 or 3) and Epyon. Tallgeese could be very likely actually, considering that they could release 3 models of Tallgeese, then the Hayate, Mercurius, and the Leo all with the same basic mold.

[OHWceta]

Shaman King Figures are a must! Well....more than just the tiny set of Mattel ones that were only sold in a few stores. I want a Spirit of fire!
Megaman NT Warrior Woodshield, AquaBlast, and ElecTeam figures (They made HeatGuts).
A D-Real Antylamon Figure.
Virus Mode Repaint of the Digivolving Kerpymon figure.
SD versions of ALL the Gundams from Gundam 00, not just Exia (I'm trying to make some...but still.)
Cheap Bandai Gundam 00 Action Figures. After G-Gundam killed Gundam sales and ruined any chance of future series to release figures in
American stores, the Gundam series with my favorite designs comes out! I miss 10$ Gundam Figures at Wal-Mart.
1/100 Throne Gundams.
1/100 Reborns Gundam.
I also wish they would have made Deathscythe from SD Gundam Force WITH the Steel Dragon.
Mass Effect Figures for the first game. (I know there's plans for figures from Mass Effect 2, but no Wrex!)
Sora Anti-Drive (I have all the other Play Arts Drive modes for Sora.)
Play Arts Riku from Kingdom Hearts II.
Play Arts Xemnas (With the White Robe.)
Bionicle: Mata Nui's True form.
Transformers Movie Style Tidal Wave.
Transformers Devastator that actually includes all the constructicons and can transform into the idividual robot modes and the combined form.
Transformers Leader Class Movie Blackout (He was the biggest one in the first film, he shouldn't be smaller than Optimus in toy form.)
Transformers Voyager Class Bonecrusher (He really got jipped being put in deluxe, such a puny toy.)

My list goes on and on but that's all I can think of for now.

[Storm Wing]

Transformers Devastator that actually includes all the constructicons and can transform into the idividual robot modes and the combined form.

...You didn't noticed the Legend Class Devastator? ^^;; (In Japan, it's called as EZ Series). Those tiny, itsy-bitsy Legend Class can combine. FOR REAL!! ^_^

Transformers Leader Class Movie Blackout (He was the biggest one in the first film, he shouldn't be smaller than Optimus in toy form.)
Transformers Voyager Class Bonecrusher (He really got jipped being put in deluxe, such a puny toy.)

I agree on Leader class BlackOut. StarScream should stay in Voyager class (FYI, i've seen a picture of Not-Released-Yet Leader class StarScream). Oh, and yeah, a voyager class BoneCrusher would be awesome ^_^

[Xehn]

Technically even the Legends is missing two components... The left leg and left arm each had an additional yellow vehicle aiding in their makeup.