I need charging cradle measurements! HELP!

[Shinki_Crazed]

Hello awesome folks I need some assistance in my next project. I want to build a charging cradle for my Werkstra who is on her way. But I have no clue how large the cradle needs to be. Exact measurements would be greatly appreciated! Pictures are also welcome

[Shinki_Crazed]

The main white base is 3 5/8" inches wide, 6 1/8" long, and 3/4" thick. The black pad on top of the base is 2 15/16" wide, 4 5/16" long, and 3/32 thick, with the front edge set back 5/8" from the edge of hte white base. The seat back is 2 9/16" tall at the highest point, and has arm rest sort of groves at 5/8" above the pad, with 1 7/16" inside width and 1 3/16" to the sloping back rest. Max width at the bottom is 3 5/16" and 1 9/16" at the top, where the headrest is 7/32" thick with the edges coming forward 7/16. The black strip on the inside is 1 7/16" at the bottom and 13/16" at the top.

Pic for reference, let me know what kind of pictures you need to make those dimensions make sense.

Oh this is perfect! Thank you so much, would you mind posting one more picture of the cradle and your Shinki laying flat on it? I want to see if her feet will hang.

[Shinki_Crazed]

This help?

These are perfect! Thank you and your Shinki for the help

[halconfenix]

Now that I'm at work, wow. Those pictures are dark. I swear they looked normal at home. Glad they were helpful though.

more than helpful!
i'm also working on my own versión of the cradle using 3d modeling/printing and all these pics and measurements help a LOT! thanks for the info!

[Shinki_Crazed]

Now that I'm at work, wow. Those pictures are dark. I swear they looked normal at home. Glad they were helpful though.

more than helpful!
i'm also working on my own versión of the cradle using 3d modeling/printing and all these pics and measurements help a LOT! thanks for the info!

Oh! Please post progress pictures:0

[halconfenix]

viewtopic.php?f=7&t=595&start=60