REVOLTECH!
- star
- Class S Shinki
- Posts: 1661
- Joined: Thu Mar 26, 2009 5:48 pm
- Shinkis owned: 0
- MMS owned: 0
- Favorite MMS/Shinki: Ianeira
- Location: Here
Re: REVOLTECH!
I wish revoltech would brawden their horizons a bit, if the coverewd more genres they may make more money
- star
- Class S Shinki
- Posts: 1661
- Joined: Thu Mar 26, 2009 5:48 pm
- Shinkis owned: 0
- MMS owned: 0
- Favorite MMS/Shinki: Ianeira
- Location: Here
Re: REVOLTECH!
so one of my recent revoltech figures came with a small clear-ish purple assemble borg in it, I was trying to pose it but the assembleborg only came with 2 working joints in the shoulders, is that normal? all the other joints were plastic and looked like joints but were not actual joints and it was frustrating, I had to get my extra peach toned joints to give the assemble borg some mobility, also the figure he came with was Leina from the queen's blade line, I am unsure if all new Leina's come with these or if I won some type of prize but it struck me as a bit odd and cheap that they did not articulate the assemble borg, also I am haveing issues removing my Leina's chest plate from her torso, I know this is not a thread for talk about queen's blade but this seems like a general question about revoltech, how can I seperate Leina's body from her chest plate without breaking it since it is jointed with a hinge and not a revoltech joint? I have already tryed using an exato knife to pry the pieces apart and it almost broke the knife
- Xehn
- Kamen Adminder
- Posts: 1291
- Joined: Sun Apr 27, 2008 1:28 pm
- Shinkis owned: 33
- MMS owned: 0
- Favorite MMS/Shinki: Partio
- Contact:
Re: REVOLTECH!
yeah the promo mini assembleborgs only come with two actual joints.
- Storm Wing
- Class S Shinki
- Posts: 952
- Joined: Sun Nov 09, 2008 10:15 am
- Shinkis owned: 5
- MMS owned: 3
- Favorite MMS/Shinki: Asuka
- Location: Indonesia ^_^
Re: REVOLTECH!
^Yikes. It'll cost you more to get another flexible joints ^^;;Xehn wrote:yeah the promo mini assembleborgs only come with two actual joints.
Hey, Star. Can you take a pic or two of that mini Assemble Borg?
Cut! Cut cut cut cut cut cut cut cut CUT!!
Spin the vermin, reverse the guilt. Reverse the birth, reverse the world. Spin spin spinspinspinSPIN~~~!
- star
- Class S Shinki
- Posts: 1661
- Joined: Thu Mar 26, 2009 5:48 pm
- Shinkis owned: 0
- MMS owned: 0
- Favorite MMS/Shinki: Ianeira
- Location: Here
Re: REVOLTECH!
sure, as soon as my camera charges, it might take a while though, my mini assembleborg is also currently holding stuff for me while I glue it, he may not have many joints but he sure makes a decent weight LOLStorm Wing wrote:Hey, Star. Can you take a pic or two of that mini Assemble Borg?
- Xehn
- Kamen Adminder
- Posts: 1291
- Joined: Sun Apr 27, 2008 1:28 pm
- Shinkis owned: 33
- MMS owned: 0
- Favorite MMS/Shinki: Partio
- Contact:
Re: REVOLTECH!
you need a bunch of the small black joints right?
http://www.amiami.com/top/detail/detail ... 3&page=top six per set, you may need more than one set, I don't know how many joints you need.
http://www.amiami.com/top/detail/detail ... 3&page=top six per set, you may need more than one set, I don't know how many joints you need.
- Storm Wing
- Class S Shinki
- Posts: 952
- Joined: Sun Nov 09, 2008 10:15 am
- Shinkis owned: 5
- MMS owned: 3
- Favorite MMS/Shinki: Asuka
- Location: Indonesia ^_^
Re: REVOLTECH!
Let's see...Xehn wrote:you need a bunch of the small black joints right?
http://www.amiami.com/top/detail/detail ... 3&page=top six per set, you may need more than one set, I don't know how many joints you need.
- neck
- shoulders x2
- elbows x2
- wrists x2
- waist
- torso
- thighs x2
- knees x2
- ankles x2
Total 15 joints. He needs 3 set to buy ^^;
Cut! Cut cut cut cut cut cut cut cut CUT!!
Spin the vermin, reverse the guilt. Reverse the birth, reverse the world. Spin spin spinspinspinSPIN~~~!
- star
- Class S Shinki
- Posts: 1661
- Joined: Thu Mar 26, 2009 5:48 pm
- Shinkis owned: 0
- MMS owned: 0
- Favorite MMS/Shinki: Ianeira
- Location: Here
Re: REVOLTECH!
ok, I know I said I'd take a pic but I am having issues with that, I did google the assemble borg I got and found this picture of it http://media.photobucket.com/image/rece ... GA0400.jpg I got one of the purple ones from this pic, they are all the same model but it looks like they have different colors, I had some spare peach joints from another figure, I bought them on amiami because I had a bad joint that needed replacement, I just used those joints to give mine mobility, when I sort out my camera again I can post a pic of it if I remember though, if you still wanna see it, but thank you, Xehn, for that link with the joints, ever since I bought the peach joints about a year ago I have been unable to find more joints on amiami for some reason
- Storm Wing
- Class S Shinki
- Posts: 952
- Joined: Sun Nov 09, 2008 10:15 am
- Shinkis owned: 5
- MMS owned: 3
- Favorite MMS/Shinki: Asuka
- Location: Indonesia ^_^
Re: REVOLTECH!
Cut! Cut cut cut cut cut cut cut cut CUT!!
Spin the vermin, reverse the guilt. Reverse the birth, reverse the world. Spin spin spinspinspinSPIN~~~!
- infinitygundam103
- Class A Shinki
- Posts: 159
- Joined: Tue Oct 26, 2010 9:49 pm
- Shinkis owned: 32
- Favorite MMS/Shinki: Arnval mk2 Tempesta
- Location: Sylva, NC
Re: REVOLTECH!
Snake on the prowl...
just me stealing your shadow...
and whatever else a camera can take.
and whatever else a camera can take.